The mobile power polymer battery is a new type of battery. Its most notable feature is that it is very thin, light in weight, and diversified in appearance and shape, and most of the mobile power polymer batteries can also be made of aluminum-plastic film. It is used as the outer shell to ensure safety during use. However, due to improper operation during use, the temperature will rise or be oxidized, and the battery will also experience gas expansion, and it will also cause an explosion in severe cases. So how do we charge the polymer battery of the mobile power supply during use?

    The charging method of the polymer battery of the mobile power supply

    For the new polymer battery, since the battery will automatically enter the dormant state after being placed for a period of time, the capacity of the polymer battery is very low at this time, and it will also affect the shortening of the battery's use time. At this time, you can The polymer battery is charged and discharged normally three to five times. This cycle process can activate the battery and return to its normal capacity; and during the charging process, it is only necessary to fully charge the battery in the first three times of charging. There is no need to overcharge or overdischarge the battery. It takes about half an hour after the polymer battery is fully charged. Overcharge and overdischarge will affect the battery to a certain extent, thus affecting the service life of the battery.

    The precautions for charging the polymer battery of the mobile power supply

    In addition to charging the polymer battery according to the above method, other improper operations will also affect the service life of the polymer battery, such as using a charger that does not match the polymer battery, which affects or damages the polymer The battery, so, in the charging process, try to use the original charger, and the best charging method for polymer batteries is slow charging. If you want to charge as quickly as possible, repeated charging and discharging will also affect the life of the battery. .

    If it is the polymer battery of a mobile phone, if it has not been used for more than a week, it should be used after the battery is full; for some polymer batteries that use ordinary chargers, the battery will stop charging after the battery is fully charged, if you continue to charge , It will only lead to the heating of the polymer battery, thereby affecting the use of the battery.

    The above is how to charge the mobile power polymer battery, and some problems we should pay attention to during the charging process. Similarly, if we are not using electronic products, we should disassemble the battery to keep the product and the battery separate. When you need to use the product, install the battery again, which will help to extend the life of the battery. Only when we pay attention to these requirements during normal use, will the polymer battery last longer.