Ordinary wireless router, can be logged in via a network cable to log in, while the mobile power type router generally accesses through the wireless network, that is, you need to connect to WiFi and log in to log in. .

    Press and hold the switch of the mobile power. When you press the light, you can know that the 3G router function can be used; at this time, you search for the wireless signal emitted by the computer and enter the password to log in.

    We can see that the characters on the back of the mobile power are the name of the hotspot. You can help you quickly find this signal; then log in to the IP address marked by the back of the mobile power, enter the interface of the landing, which is a very familiar family. Network login method, enter the username and password provided by the network to log in to success.

    It should be noted here that the permanent connection can be selected when running mode pop-up, so that the functionality of the router can be used without the need to set up again.

    At this point, we click on the WiFi's security settings on the pop-up page, and then in this sub-window to select WPAPSK / WPA2PSK that is very familiar with everyone, enter your password Click the confirmation button.

    Then insert the network cable into the interface of the mobile power, the LAN / WAN interface that needs to be used in normal connections, and subsequent settings are also completed all.

    At this time, you only need to use your computer and your mobile device to detect the wireless signal, you can see the signal you use, enter the password you set, the speed of the Internet is not a lever!

    Need to remind you that the IP address and system default password when you log in are different, just you can get from the back of the mobile power.