To charge the IPAD or tablet, you must choose a power bank supply with 5v/2A output. Using a power bank supply with an output below 2A will cause the problem of dissatisfaction and short use time after charging.

    The output voltage of the power bank supply must be within the range of 5±0.5V, otherwise some brands of mobile phones cannot be charged.

    The transfer connector must be matched. The use principle of the power bank product is to charge the digital device through the USB cable. One end of the cable with a USB interface is connected to the power bank product, and the other end is connected to the digital device. The interface of the digital device is the same, otherwise it cannot be charged and the internal resistance of the USB cable cannot be too large. Exceeding the normal standard will cause the charging time to be too long or even the charging failure.

    The power bank supply should be in a dry environment. Rain, humidity, and various liquids or moisture will corrode electronic components and circuits.

    The power bank supply cannot be stored in a high temperature place. High temperatures will shorten the life of electronic devices, damage batteries and age certain plastics.

    Don't throw or knock the power bank in a rough way. Rough use may damage the internal circuit board and precision machinery.

    Applicable to Apple IPOD/IPHONE, Samsung Galaxy, BlackBerry phones, NOKIA phones (NOKIA phones that do not support early round hole charging), Samsung phones, MOTO phones, Sony Ericsson phones, e-books, PSP, NDSL, NDS, PMP, MP3 , MP4, MP5 and other USB rechargeable products, optimized and designed specifically for smart phones to achieve an extremely fast charging experience, with a maximum output current of 2A.